Two are types of Hydraulic Data that you have to import: the plans of the Failure and Non Failure scenarios.
Open the window for the import of the HEC-RAS plans.
Select the HEC-RAS Plans Directory, that is the folder where are located the plans for the Failure and Non Failure scenarios.
Then, select the Failure (F) plan.
Click the "Import From RAS" button.
The RAS Result Selector dialog box will open. Select the hydrograph curve and press OK.
You obtain the plot of the selected hydrograph along with two vertical lines:
-
First Timestep (green line)
-
Hazard Occurrence (red line)
You should set the Hazard Occurrence date and time to coincide with the peak of the hydrograph.
Then, press OK to close the dialog box.
The hydraulic data is added to your study and you can find it in the Study tree under Hydraulic Data.
Aggiungi commento
Commenti